Decal Installation Guide

A clean finish starts here.

1. Clean. Wash the application area and let it dry fully. Remove wax, oil, and residue using a surface-safe cleaner.
2. Position. Lay the decal on a flat surface and rub over the transfer tape. Check your placement before removing the backing.
3. Peel. Slowly peel the paper backing away. If a letter lifts, lay it back down and rub again.
4. Apply. Place the transfer tape and decal on the clean surface. Press from the center outward with a squeegee or a card wrapped in a soft cloth.
5. Reveal. Slowly peel the transfer tape back at a low angle, leaving the lettering behind. If a letter lifts, press it back down and try again.

Apply to a smooth surface. Avoid obstructing visibility, cameras, sensors, or lights. Follow the vinyl manufacturer’s temperature and curing guidance before washing.